16
DemoSample company and data, reset every night. Demo: messages are simulated, nothing is actually sent.Exit demo
SG 52
Sprayer · 2025 Steel Green SG 52
214.6 hrNow (10/22/26)
Sprayer2025 Steel Green SG 52
$401.89Spent
by 10/23/26Next Service
SerialDEMO-SN-40359
NotesShop unit. Intervals from the SG Series manual (tires Front 22, Rear 18 PSI); Nozzle Calibration is typical.
New Hours ReadingNow 214.6 hr
Quick Calc
Try speed, nozzle, pressure, levers and tanks; nothing changes until Save to This Rig.MoreLess
- What It Does
- The gauges over the rig photo show PSI, MPH, GPM per nozzle, gallons per 1,000 ft², area and minutes per tank, and fills for the area. Open levers light their nozzles; turning a lever off shows What Changed.
- What It Changes
- Nothing changes until Save to This Rig, which keeps the speed, nozzle, pressure, levers and tanks it opens with.
- How to Use
- Move speed, nozzle, pressure, levers and tanks.
- Read the gauges and What Changed.
- Press Save to This Rig to keep it.
Speed Sheet
The nozzle chart by nozzle: PSI, drop size, GPM per nozzle and gallons per 1,000 ft² at the rig's speeds. Tap a row to try it.MoreLess
- What It Does
- Gallons per 1,000 ft² = GPM x 5,940 / (mph x spacing in.) / 43.56, so one GPM covers every speed. A pressure not on the sheet is estimated from the same nozzle.
- What It Changes
- Tapping a row only tries it. Save to This Rig keeps it; Edit adds or changes rows.
- How to Use
- The nozzle in use opens highlighted.
- Tap a row to try it.
- Press Save to This Rig to keep it.
Service Intervals
Regular upkeep for this unit, like an oil change every 100 hours or 180 days.MoreLess
- What It Does
- Tracks each interval with when it was last done, when it's next due and its status.
- What It Changes
- When one comes due it shows Due, and a Task can be made for the office (Equipment settings). Log Done starts the count again.
- How to Use
- Click Add a Service and set Every (hours) and or Every (days).
- Click Log Done after the work.
- Watch Status for Due Soon.
Add a ServiceEvery so many hours or days
| Service | Every | Last Done | Next | Status | |
|---|---|---|---|---|---|
| Engine Oil and Filter | 100 hr | 4/8/26 132.6 hr | at 232.6 hr | OK | Log Done · Edit |
| Grease Points | 30 days | 9/26/26 214.6 hr | by 10/26/26 | Due soon | Log Done · Edit |
| Hoses, Gun and Hose Reel | 30 days | 10/2/26 214.6 hr | by 11/1/26 | OK | Log Done · Edit |
| Hydraulic Oil and Filter | 500 hr | 7/27/26 -0.4 hr | at 499.6 hr | OK | Log Done · Edit |
| In-Line Filter and Gasket | 14 days | 10/16/26 214.6 hr | by 10/30/26 | OK | Log Done · Edit |
| Nozzle Calibration | 90 days | 9/22/26 214.6 hr | by 12/21/26 | OK | Log Done · Edit |
| Tire Pressure Task | 7 days | 10/16/26 214.6 hr | by 10/23/26 | Due | Log Done · Edit |
Maintenance Log
Write down upkeep and repairs on this unit, with cost, vendor, parts and downtime.MoreLess
- What It Does
- Keeps a dated list of what was done, the reading, cost and vendor.
- What It Changes
- Logging an interval Service resets that interval. Parts come off On Hand. Down From with no Back in Service marks it Down. Costs add up in Reports.
- How to Use
- Pick the Service or Other / Repair.
- Fill in what was done, the date and cost.
- Click Log It.
Log Service or RepairDate, cost, parts and down time
| Date | What | Hours | Cost | Vendor | By |
|---|---|---|---|---|---|
| 10/16/26 | In-Line Filter and Gasket | 214.6 | $129.95 | Demo Auto & Diesel | Dana |
| 10/16/26 | Tire Pressure | 214.6 | $64.99 | Demo Auto & Diesel | Dana |
| 10/2/26 | Hoses, Gun and Hose Reel | 214.6 | $129.95 | Dana | |
| 9/26/26 | Grease Points | 214.6 | Dana | ||
| 9/23/26 | Hours reading Reading | 192.6 | Claire | ||
| 9/22/26 | Nozzle Calibration | 214.6 | $38.50 | Demo Auto & Diesel | Dana |
| 8/24/26 | Hours reading Reading | 170.6 | Claire | ||
| 7/27/26 | Hydraulic Oil and Filter | -0.4 | Dana | ||
| 7/25/26 | Hours reading Reading | 148.6 | Claire | ||
| 6/25/26 | Hours reading Reading | 126.6 | Claire | ||
| 5/26/26 | Hours reading Reading | 104.6 | Claire | ||
| 4/8/26 | Engine Oil and Filter | 132.6 | $38.50 | Dana |
Spray Rig
The rig's tanks, nozzle, pressure, spacing and how many nozzles each lever opens.MoreLess
- What It Does
- These numbers drive the Tank Calculator: gallons per 1,000 ft² come from the nozzle's GPM on the Speed Sheet, the width from the open levers.
- What It Changes
- Saving changes the Tank Calculator and Quick Calc for this rig right away. Past Services keep their numbers.
- How to Use
- Press Edit.
- Fill Tanks, Each Tank, Nozzle, Pressure, Nozzle Spacing and the three lever counts.
- Add the Speed Sheet rows.
- Save.
Tanks2
Each Tank30 gal
NozzleXRC11010
Pressure20 PSI
Nozzle Spacing20 in
Left Lever Nozzles1
Center Lever Nozzles3
Right Lever Nozzles1
Spray Width8 ft
Usual Speed5 mph
Chart Speeds3, 4, 5
Pumps2
Pump Max70 PSI
Manual and Files
The machine's photo and its manual PDF.MoreLess
- What It Does
- Read Manual with AI (Spray Rigs) reads the manual once to fill the rig numbers for you to check before Save.
- What It Changes
- The photo shows on the rig and in Route. AI reading only fills the form; nothing is saved until you press Save.
- How to Use
- Add the photo.
- Add the manual PDF.
- On a Spray Rig, press Read Manual with AI and check the numbers before Save.